Table Des Matières; How To Reset Your Unit; How To Forcibly Eject A Disc - JVC EXAD KD-AVX40 Manuel D'instructions

How to reset your unit

• Your preset adjustments (except for the registered
Bluetooth devices for KD-AVX40) will also be erased.

How to forcibly eject a disc

[Hold]
• Be careful not to drop the disc when it ejects.
• If this does not work, reset the unit.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Contents
How to reset your unit .......................... 3
How to forcibly eject a disc .................... 3
INTRODUCTION
Playable disc type ................................. 4
Before operations ................................. 5
OPERATIONS
Basic operations-AV menu .................. 6
Basic operations-Control panel ........... 8
Basic operations-
Remote controller (RM-RK252) ........... 10
Listening to the radio ........................... 12
Disc operations ..................................... 18
USB operations ..................................... 31
Bluetooth® operations (KD-AVX40 only)-
Cellular phone/audio player .............. 33
EXTERNAL DEVICES
Listening to the iPod/iPhone ................. 40
Listening to the CD changer ................... 43
Listening to the DAB tuner .................... 45
Listening to other external
components ...................................... 48
SETTINGS
Sound equalization ............................... 50
Assigning titles to the sources ............... 51
Menu items .......................................... 52
REFERENCES
Maintenance ........................................ 60
More about this unit ............................. 61
Troubleshooting ................................... 68
Specifications ....................................... 72
3