JVC EXAD KD-AVX40 Manuel D'instructions page 68

Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/LINE OUT)
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT (optical) terminal
Digital signals (Linear PCM, Dolby Digital and MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or a decoder
compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly. (☞ page 55)
• DTS sound cannot be emitted.
Playback disc
DVD 48 kHz, 16/20/24 bits Linear
PCM
96 kHz, Linear PCM
with Dolby Digital
with MPEG Audio
Audio CD, Video CD
DivX/MPEG with Dolby Digital
with MPEG Audio
MP3/WMA
WAV
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs
are not copy-protected.
<D. Audio Output>
stereo Linear PCM
stereo Linear PCM
Output signals
<PCM Only> <Dolby Digital>
48 kHz, 16 bits stereo Linear PCM*
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits
48 kHz, 16 bits stereo Linear PCM
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits
32/44.1/48 kHz, 16 bits Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits Linear PCM
66
<Stream>
Dolby Digital bitstream
MPEG bitstream
Dolby Digital bitstream