Hdmi Connection - Haier L39B2180 Manuel D'usage Et Entretien

HDMI Connection

Note: All cables shown are not included with the TV.
USB HDMI1
HDMI cable
- Connect the HDMI port on the DVD player to the HDMI port on the back of the TV with a HDMI
cable.
- Turn on the DVD player, and select "HDMI1/2/3" in the input source menu.
interface that supports uncompressed audio and video
PC Connection
Note: All cables shown are not included with the TV.
HDMI1 HDMI2 HDMI3
VGA cable
- Connect the VGA port on the PC to the VG A port on the back of the TV with a VGA(D-sub 15)
cable.
- Connect the audio output or headphone jack on the PC to the PC AUDIO jack on the back of
the TV with a 3.5mm audio cable.
- Turn on the PC, and select "VGA" in the input source menu.
HDMI2 HDMI3
DVD player or VCR
- If you are using a sound card,
VIDEO
AV
adjust the PC sound as required.
- Set the video resolution of your
PC to 1024x768, 60Hz on its
original monitor.
It is recommended that you
audio
make the connections between
cable
the TV and your PC,
(3.5mm)
and then switch on the TV
before booting the PC.
You can now set your preferred
resolution from the choice
VGA
supported.
See the table of supported
resolutions on the right.
Connection
A/V
1920 x 1080, 60Hz
13