Genesis GMCS140 Manuel D'utilisation page 7

Scie à coupe abrasive de 355mm (14 po)
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Always tighten arbor screw and all clamps before operating.
• Never touch any moving parts
• Never use the tool near flammable liquids or gases
an explosion.
• Never expose hands, feet and fragile things to the sparks
grinding sparks may harm them.
• Before moving this tool, lock the cutting head in the lower position.
Unplug the power cord.
• Do not operate in rain or in damp locations.
• Grounding required.
, including the cut-off wheel, while the tool is in use.
SAVE THESE INSTRUCTIONS
. Sparking could cause
, as the
7

Publicité

Table des Matières
loading

Table des Matières