Blackhawk Automotive BH6033 Instructions D'utilisation Et Manuel De Pièces page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SPECIFICATIONS
Service Jack
Capacity
3 Ton
Jack Stands
Capacity
3 Ton
WARNING
!
- Service Jack -
• Study, understand, and follow all instructions
before operating this device.
• Do not exceed rated capacity.
• Use only on hard, level surface.
• Lifting device only. Immediately after lifting,
support the vehicle with appropriate means.
• Lift only on areas of the vehicle as specified by
the vehicle manufacturer.
• Do not move or dolly the vehicle while on the
jack.
• No alterations shall be made to this product.
• Failure to heed these markings may result in
personal injury and/or property damage.
Min. Height
Max. Height Saddle Dia.
5-1/2"
19-1/2"
Min. Height
Max. Height
11-1/2"
17"
Jack Size (L x W x H)
4-3/8"
23-3/4" x 13-3/8" x 6-1/2"
Saddle Size
3-1/2" x 1-3/8"
WARNING
!
• Study, understand, and follow all instructions
before operating this device.
• Do not exceed rated capacity.
• Use only on hard level surface.
• Center load on saddle.
• Use as a matched pair only.
• Stands are not to be used to simultaneously
support both sides or one end of a vehicle.
• No alterations shall be made to this product.
• Failure to heed these markings may result in
personal injury and/or property damage.
WARNING
!
To avoid crushing and related injuries:
• Never work on, under or around a load supported
only by hydraulic jack.
• Always use adequately rated jack stands.
• Chock each unlifted tire in both directions.
• Do not use this device to lift, level, lower, support
nor move a house, mobile home, travel trailer,
camper or any building structure.
• Be alert and sober when using this product.
Do not operate under the influence of drugs or
alcohol.
3
Base Size (L x W)
7-3/4" x 6-3/4"
- Jack Stands -
X

Publicité

Table des Matières
loading

Table des Matières