Suntec Wellness Klimatronic DryFix 10 Pure Mode D'emploi page 19

Masquer les pouces Voir aussi pour Klimatronic DryFix 10 Pure:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Filter removal
Please open the inlet grill and remove the air filter.
You can remove the dirt with a vacuum cleaner and wash the filter in a warm water (< 40°C)
with mild detergent. Let the filter dry thoroughly and install it properly into filter carriage.
Maintenance instruction
1. Place the unit on a stable flat surface to avoid loud noises and vibrations.
2. Never insert any slim rod and hard object into the unit body to avoid occurrence of hazard
or unit failure.
3. If the unit will not be used for a long time, please unplug the unit.
4. For a better dehumidifying effect, the areas in front and rear of the unit should be clear
and free from obstacles, which will block the air flow for the unit.
5. Clean the filter every two weeks (never use alcohol, gasoline, or hot water).
Storage
 Unplug the unit and empty the water tank.
 Clean and dry the air filter, then install it back into the unit.
 Disconnect the exhaust hose from the unit and keep it safe.
 Put the unit into a box and take it to a dry place.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Klimatronic dryfix 20 pure

Table des Matières