Power Supply; Inserting The Cassette; Function Keys - Esselte Dymo LetraTag Guide D'utilisation

Visit our website (www.dymo.com) for information
on obtaining tapes and accessories for the LetraTag.

Power Supply

• Insert six size AA batteries, as shown in Fig. A.
• Remove batteries if the Labelmaker is to be unused for some time.

Inserting the cassette

• The Labelmaker uses paper, plastic and metallic labels.
• Insert cassette as shown in Fig. B and press until it "clicks" into place - Fig. C.
• Check that the cassette is correctly located before closing the access door.
The Display
• Shows up to 6 characters plus cursor and 5 indicators
Indicators show whether a feature is selected.
CAPS = capital letters

Function keys

ON/OFF
Switches the power on and off.
• Switches off automatically after two minutes if no keys are pressed. The last
label will be retained automatically in memory.
Note: If the batteries are removed for more than a few seconds,
the memory will be lost.
CAPS
123456
= box/underline
B = BIG CAPS
STYLE B
as shown below.
123
STYLE = outline/italic etc.
= shift key
GB