CASO DESIGN Barista Flavour Mode D'emploi page 36

5. Hold the container for the ground coffee (with the lid) unter the seal at coffee ground
outlet and gently push the container on the holder.
6. Ensure that the opening of the container flushes with the outlet for ground coffee.
7. Turn the knob for coarseness on desired coarseness (1 = fine, 15 = coarse).
8. The amount of coffee ground depends on grinding time, you can set desired grinding
time with knob for amount of coffee ground. See table 1
9.
Symbol from
left to right
Default setting
Grinding time
Manual Mode
Amount of
Man. Mode
cups
Symbol 1 ligths, this is the manual mode. The device will stop after 5 minutes, if you not
stop it manually before.
► Please note that the container for coffee ground will be filled after 60 seconds
(depending on coarseness setting).
9. Plug in the device. The first symbol lights with full brightness, the default setting is
selected. The other symbols and start/stop button are dimly lighted.
10. Select coarseness and grinding time / amount of coffee ground with step 6 and
Press button start / stop and the device grinds the beans depending on your settings.
Coffee ground dispenses from the coffee ground outlet. The signal lamp of start/stop
button blinks during this operation.
► Different cup sizes, bean type, coarseness,, personal taste etc. influence the required
serving size.. So check out the amount of coffee ground hat is optimal for you.
caso Barista Flavour
1
2
10 sec.
Ca. 2
Please note
Please note
3 4
20 sec. 30 sec.
Ca. 4 Ca. 6
5 6
40 sec. 50 sec.
Ca. 8 Ca. 10
36