Brandson 304577 Manuel D'instructions page 34

5. Assembly
Outdoor sensor
Your wireless 7-IN-1 sensor measures wind speed, wind direction, rain-
fall, temperature and humidity.
Inserting the batteries
Slide the battery compartment cover underneath the sensor open and
insert the batteries according to the indicated polarity.
Slide the battery compartment close tightly.
Caution!
The red status LED flashes once in 16 seconds when the device is work-
ing.
Assembling the stand (outer sensor)
1. Mount the U-threaded rods under the outdoor sensor.
Note: Make sure that you mount the rods properly.
34
English