7.3 Cleaning the Air Outlets
Figure 7-3 below shows the removal of the vent covers for cleaning. First remove the 4 screws
that hold the vent cover to the inverter enclosure. Next, remove the vent cover from the inverter.
With the vent cover removed, clean it on both sides. After cleaning one of the vents, proceed to
take off the vent on the opposite side and clean in the same manner. Reinstall the vent covers
securely after they have been cleaned. The cleaning of the air outlets as described above should
be done on a regular basis for optimum inverter performance.
Figure 7-3 Removing the Vent Covers for Cleaning
45