Publicité
Les langues disponibles
Les langues disponibles
EN
User Manual
Mains and surge protection switch
1
Safety Instructions
1.1
General
•
Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct use.
•
Keep this user manual.
It must be available for uncertainties and passing the product.
•
Do not open the housing.
•
Voltage-free only with pulled plug.
•
Only let a trained electrical engineer do installation, disassembling, main-
tenace and repairing work.
•
Compare the specifications of product, power supply and peripherals.
These must be identical.
•
Do not repair defective products by yourself, but contact the dealer or
producer.
•
Do not modify or alter product nor accessories.
•
Avoid stresses such as heat and cold, moisture and direct sunlight, vibra-
tion and mechanical pressure.
•
Only use in dry ambience.
•
Nicht hintereinanderstecken.
•
Do not cover the product.
•
Do not plug in a row.
•
The overvoltage protection is active when the surge protection indicator
is on.
•
Do not operate in an explosive environment.
•
Secure packaging, small parts and insulation against accidental use.
•
Risk of injury by stumbling and falling
1.2
Warning levels
Warnings against hazards that may result in injuries in case
of non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2
Description and Function
2.1
Description
This product is a surge protector that protects your devices against overvoltages,
e.g. against lightning strike. The integrated child safety device protects against unin-
tended contact and the operating LED shows whether voltage is present.
2.2
Scope of delivery
Surge protector, user manual
2.3
Operating elements and parts
Fig. 3: Operating elements and parts
1
protective contact socket (output)
2
housing
3
safety plug (input)
4
overvoltage protection indicator (operation LED)
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4
Preparing
•
Compare the specifications of product, power supply and
peripherals. These must be identical.
•
Check the scope of delivery for completeness and integrity.
5
Connecting
Fig. 4: Connecting
1.
Connect your household devices to the surge protector.
2.
Connect the surge protector to a good accessible safety
power socket.
The overvoltage protection is active when the operating LED is lit.
The operation LED lights when voltage is applied.
REV2017-01-19
V2.0
1
2
3
4
6
Operating
There are no operating elements to operate during use.
7
Specifications
Housing
Connectors
Input voltage
Max. allowable load
Overvoltage protection
Protection level
Protection class
Dimensions
Weight
Tab. 2: Specifications
8
Maintenance and Cleaning
The products are maintenance-free.
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
9
Liability notice
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current
form under the given contact details.
10
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
11
EU Declaration of Conformity
Goobay
With the CE sign,
GmbH ensures, that the product is conformed to the basic European
standards and directives.
- 2 -
plastics
safety contact
250 V~ 50 Hz
16 A, 3500 W
Uc 250 V~; TYP 3
Uoc 3 kV (L-N, L/N-PE)
Up 1.8 kV (L-N,L/N-PE)
IP20
1
77 x 76 x 51 mm
76 g
®
, a registered trademark of the Wentronic
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
51270
Goobay
®
Publicité
