Coin Mechanism Accessory; Outline Of Operation; Storage - Keurig B200 Mode D'emploi

SECTION 6

COIN MECHANISM ACCESSORY

If a Coin Acceptor Accessory kit is ordered
with this Brewer, the accessory package will
include an Installation Guide. To activate the
Coin Mechanism Accessory, enter the menu as
outlined in section 3.
The Coin Acceptor Accessory kit comes with a
faceplate for the right side of the Brewer. This
faceplate includes the entrance slot for deposit-
ing coins, a coin return button to return a
jammed coin and the coin return slot at the
bottom. The Brewer will step the customer
through normal usage automatically.
The Coins are collected in a container inside
the brewer and are accessed through a locked
door behind the Drip Tray. When the coin
container becomes full, the Coin Acceptor will
no longer register a coin deposit. It is at this
time that the user should empty the container.

Storage

Drain both the Hot Water and Cold Water tanks
before storing and take care to ensure that you
store your Brewer in a safe and frost free envi-
ronment. It is suggested to store your brewer
in the upright position. If you store the Brewer
in a cold environment, you run the risk of
water freezing inside the Brewer and causing
damage. When you prepare to use it after
storage, we recommend rinsing the Water
Reservoir with fresh water and running three
cleansing brews without a K-Cup
The Coin Acceptor accessory will accept US
25¢, 10¢, 5¢ and Keurig token and Canadian
$1, 25¢, 10¢ and 5¢ coins.
If you plan to move your Brewer to a different
location, turn the Brewer off, unplug it and
empty both the Hot Water and Cold Water
tanks. If your Brewer has been in an environ-
ment below freezing, please be sure to let it
warm to room temperature for 2 hours before
using.
® .
17