Changing the dust bag
CLICK!
Replacing the micro-hygiene filter
The micro hygiene filter should be changed when
starting a new pack of bags.
Open the dust bag compartment lid
Unlock the filter holder by pushing the locking tab in
the direction of the arrow.
Remove the foam and micro-hygiene filter.
Place a new micro-hygiene filter and the foam in the
filter holder.
Insert the filter holder back into the vacuum cleaner
and click it into place.
Replacing the HEPA filter
If your vacuum cleaner is equipped with a HEPA filter, this
should be replaced once a year.
Open the dust bag compartment lid
Unlock the HEPA filter by pushing the locking tab in
the direction of the arrow and remove it from the
vacuum cleaner.
Insert the new HEPA filter and click it into place.
After vacuuming up fine dust particles, shake out
the motor protection filter to clean it and replace
the micro-hygiene filter, activated carbon filter or
HEPA filter if necessary.
17