Care And Cleaning - babymoov Nutribaby+ Notice D'utilisation

CAUTION:
1. To prevent risk of burns, always check the temperature of the food before feeding your baby. Shake baby bottles well to mix, then
pour a drop of milk on the inside of your wrist to check the temperature.
2. The pre-programmed cycles are based on the average heating time of a baby bottle or baby food jar. The size and thickness of
the baby food jar may affect the temperature of the food. If the food is too hot or too cold, reduce or increase the heating time
using the 'steam' function.
3. The size, material and thickness of the baby food jar or bottle and whether or not it has a removable bottom may affect the
temperature of the food.
4. Heating more than one bottle at once may also affect the reheating time. If the food is too hot or too cold, reduce or increase the
heating time using the 'steam' function.
The suggested time for the Nutribaby+ / XL to heat baby bottles and baby food jars no longer applies in the following conditions:
- Temperature of water/milk or baby food jar:
· below 4°C - refrigerator temperature,
· above 20°C - room temperature.
- Temperature of water in the tank above 20°C.
- Nutribaby+ / XL already in use: if the product is already in use, stop it, remove the water from the tank and wait 15 minutes
before turning it back on.
- Remove the cooking water vessel (1.3.).
- Stack the baskets and place them on the base (1).
- Place the baby bottles upside down and any accessories you wish to sterilize directly onto the removable cooking tray (1.5.).
- Place the lid (1.7.) on the upper basket.
1. Select the sterilizing
function and press OK.
A beep sounds.
N.B.: we recommend you to read the "Care and precautions for use" part to know how to clean your Nutribaby + / XL and optimize
its lifetime.
ALARMS
- An alarm will sound and the icon
the steamer baskets and add water in the water tank (1.1.).
Press OK to turn off the alarm, then press OK again to restart the timer.
- An alarm will sound at the end of the cycle to notify you that cooking is complete.
CLEANING
CAUTION: Unplug Nutribaby + / XL and ensure it is cool before cleaning! The bases of the steamer and blender must not be washed
in a dishwasher.
- Wipe off the heating unit inside the tank, and the base of the blending unit with a damp cloth or sponge. Do not use detergents or
cleaners. Allow to dry. Do not wash Nutribaby + / XL under running water. Do not allow water to enter parts containing electrical
components.
- Do not use abrasive or scouring cleansers for cleaning as they may damage the apparatus and its surface.
The cooking baskets (1.4.), removable trays (1.5.), cooking water vessel (1.3.), lids (1.7.) and (3.3.), spatula and blending jug
(3.2.) may be washed using a sponge, hot water and washing liquid. Rinse well and allow to dry. These elements are also
dishwasher safe.
- To clean the blade (3.1.), simply unscrew it clockwise from beneath the jug.
16
2. The timer is flashing. An

CARE AND CLEANING

will light up on the control panel if the tank runs out of water during the cooking cycle. Remove
NUTRIBABY + / NUTRIBABY + XL • Instructions for use
STERILIZING
alarm will sound to inform
you that sterilization is over.