Selecting The Installation Location; Installation Diagram; Outdoor Unit; Installing The Indoor Unit - Mitsubishi Electric Mr. SLIM SLZ-KA09 Manuel D'installation

2. Selecting the installation location

2.1. Indoor unit
• Where air ow is not blocked.
• Where cool air spreads over the entire room.
• Where it is not exposed to direct sunshine.
• At a distance 1 m, 3 ft or more away from your TV and radio (to prevent picture
from being distorted or noise from being generated).
• In a place as far away as possible from uorescent and incandescent lights (so
the infrared remote control can operate the air conditioner normally).
• Where the air lter can be removed and replaced easily.

3. Installation diagram

Fig. 3-1

4. Installing the indoor unit

1
3
6 7
Fig. 4-1
(inch)
2
4 5
Warning:
Mount the indoor unit into a ceiling strong enough to withstand the weight of
the unit.
3.1. Indoor unit (Fig. 3-1)
A
Ceiling
B
Grille
C
Obstacle
D
Min. 1000 mm, 40 inch
E
Min. 500 mm, 20 inch (Entire periphery)
E
If setting the maintenance space for
Warning:
Mount the indoor unit on a ceiling strong enough to withstand the weight of
the unit.

3.2. Outdoor unit

Refer to the outdoor unit installation manual.
4.1. Check the indoor unit accessories (Fig. 4-1)
The indoor unit should be supplied with the following accessories.
Accessory name
1
Installation template
Washers (with insulation)
2
Washers (without insulation)
Pipe cover (for refrigerant piping joint)
3
small diameter (liquid)
large diameter (gas)
Band (large)
4
Band (small)
5
Screw with washer (M5 × 25) for mounting grille
6
Drain socket
7
Insulation
, be sure to leave is a minimum of 700 mm, 28 inch.
Q'ty
1
4
4
1
1
6
2
4
1
1
3