Apollo Pluto R Manuel page 12

PAS Ratio settings
To modify the value of PAS ratio can
match the different requirements.
For example, the range is "45-55
percent" of 1 level, bottom value can be
modified and the default is 50 percent.
Press UP or DOWN button to increase
or decrease the number. Press MODE
button to confirm and turn to the next PAS
ratio settings. 9 levels is the maximum. After
all PAS ratio inputted, press MODE button
to confirm and return to general selection
settings interface. Various symbol
definitions please refer to Attached list 2.
PAS Ratio Interface
◆ Slowly Start upSettings
Slow Start represents slowly start up.
The range is 1-4, 4 is the slowest.
To change slowly start-up settings,press
UP or DOWN button to select,press MODE
button to confirm and the meter will display
OK then return to general selection settings
interface. The default value is1.
Interface of slowly settings up
◆ Power-on Password Settings
P2:0000 represents power-on password
settings. The default power-on password is
1212.
To access the power-on password
settings, press UP/DOWN to modify the
value and then press MODE to confirm digit
one by one until the correct 4-digit password
is completed, and then press MODE to
access power-on password enable settings
interface, otherwise stay on the password
inputstate.
Power-on Password Entering Interface
12