JVC KD-S48 Manuel D'instructions page 13

If DIAL NUMBER is selected in step 2 ...
Enter the phone number to dial.
Turn the control dial to select a number
or character (see table below), press
4
/¢ to move to the entry
position. Once you finished entering the
number, press the control dial to confirm.
If VOICE is selected in step 2 ...
Speak the name (registered words) you
want to call when "WAIT VOICE" =
"[Device name]" scrolls on the display.
• Press and hold FUNC. to activate voice
dial operation directly if only one phone
is connected.
If two phones are connected, pressing
and holding FUNC. will enter
"Phone list" screen. Turn the control dial
to select a phone to activate voice dial
operation, then press to confirm.
• Only accessible when the connected
mobile phone has the voice recognition
system.
• "NOT SUPPORT" appears if the
connected phone does not support this
feature.
If SETTINGS is selected in step 2 ...
Turn the control dial to select an item (see
the following), then press the control dial
to confirm.
The following settings are applicable to
the paired device. If another device is
paired, make the settings again.
• P. BOOK SEL *
PB IN PHONE [Initial] : The unit browses the
phonebook of the connected phone.
PB IN UNIT : The unit browses the phonebook
registered in the unit. (To copy the phonebook
memory, see <P. BOOK WAIT> on page 16.)
• If the phonebook contains many numbers, you
can fast search (±10, ±100, ±1 000) through
the phonebook by turning the control dial
quickly.
• To search through the phonebook, see page 14.
*
Selectable only when the connected phone
supports PBAP.
AUTO ANSWER
•
ON : The unit answers the incoming calls
automatically. / OFF [Initial] : The unit does not
answer the calls automatically. Press FUNC. or
the control dial to answer.
RING TONE
•
IN UNIT [Initial] : The unit rings to alert you
when a call/Text Message comes in.
– CALL : Select your preferred ring tone when a
call comes in [ TONE1 — 5 ].
MESSAGE : Select your preferred ring
–
tone when a text message comes in
[ TONE1 — 5 ].
• Default ring tone is different according to the
paired device.
IN PHONE : The unit rings using the connected
phones' ring tone to alert you when a call/Text
Message comes in. (The connected mobile phone
rings if it does not support this feature.)
RING COLOR
•
29 preset colors [ Initial: 06 ] : When a call/text
message comes in, the display will flash in the
selected color. (The display will change to the
original color when the call is answered or the
incoming call stops.) / OFF : Cancels.
NR/EC MODE
•
ON [Initial] : The unit adjusts the Noise
Reduction and Echo Cancellation of the
microphone connected to the unit for clearer
sound. / OFF : Cancels.
• MIC LEVEL
Adjust the sensitivity [ 01/ 02/ 03 ] of the
microphone connected to the unit. [ Initial: 02 ]
• MSG NOTICE
ON [Initial] : The unit informs you of the
arrival of a message by ringing and displaying
"RCV MESSAGE" = "[Device name]." /
OFF : The unit does not inform you of the arrival
of a message.
Continued...
ENGLISH 13