Electrolux EXO18HEIWE Manuel D'installation page 24

24 www.electrolux.com
Wooden structure
Put a timber across the beams and install
the bolts.
Fig.30
Original concrete bricks
Install the hanging hook with expansible
bolt into the concrete.
Fig.31
New concrete bricks
Install with insertion or embedding screw.
Fig.32
(Blade shape
insertion)
Steel roof beam structre
Install the supporting angle steel.
Fig.33
Supporting
angle steel
Timber over the beam
Roof beam
Ceiling
Hanging screw bolts
(Slide
insertion)
(Pipe hanging
and embedding
screw bolt)
Hanging screw bolt
Supporting
angle steel
Overhang the unit
• Install the hanging screw bolt to
the U-shaped slot of installation
ear. Overhang the indoor unit and
measure the level degree of unit with a
gradienter.
• Fasten and fix the upside nut.
Fig.34
Gradienter
How to adjust the air inlet direction
1.
Steel bar Take off ventilation panel and flange,
cut off off the staples at side rail.
Fig.35
Dentilation panel
Hanging screw bolt
Nut (upside)
Washer (upside)
Installation ear
Washer (underside)
Nut (underside)
Fasten the nut
Air return flange
Side rail