Important - Summit GC2BGL Mode D'emploi

The enamaled grids, enameled covers "A", "B" and "C", and burner heads "T-M"
(see Figs. 11 and 11c) must also be washed and the ignition elements "AC" and
safety cut-off sensors "TC" (see Fig. 11) must be cleaned. . Clean them gently with a
small nylon brush as shown (see fig. 11b) and allow to dry fully. Do not wash them in the
dishwasher. Cleaning operations must be carried out when the cooktop and
components are not hot. The use of metal scouring pads, powder abrasives and
corrosive sprays must be avoided. Do not allow vinegar, coffee, milk, salt water,
lemon juice or tomato juice to remain in prolonged contact with the surfaces.
WARNINGS: When reassembling the components, observe the following
recommendations:
Check that the holes in the burner heads "T-M" (Fig. 11-11c) are not blocked
by foreign bodies.
Ensure that the enameled covers "A", "B" and "C" (Figs. 11-11a and 11b) are
correctly positioned on the burner head. The covers are correctly positioned
on the head when they are perfectly stable.
If the opening and closing of any valve is awkward, do not force it but request
urgent intervention by the technical assistance service.
Do not use jets of steam to clean the appliance.
The pan support must be placed in the appropriate centering pins verifying the perfect
stability.
To prevent difficulties with lighting, regularly clean the ignition elements
(ceramic and electrode) and safety cut-off switches (fig.11b).

IMPORTANT:

When removing the burners to clean them, ensure that all parts are correctly
positioned before relighting them.
FIG.11
FIG.11b
14
FIG.11a
FIG.11c