Jimmy WB55 Instructions D'utilisation page 7

Filter and Cyclone Cleaning
Hold the cyclone in one hand, pinch the "UP" logo with the other hand, and take out filter (Figure 5).Do
Not tap the filter in reverse side in case of filter clog(Figure 6).
lean the cyclone metal filter with the attached mini brush(Figure 7).
MIF filter
Cyclone
Figure 5 Figure 6 Figure 7
After cleaning filter, remove the two screws on the cyclone cover with a screwdriver to separate
the cyclone cover from the cyclone to clean the internal air duct. After cleaning, assemble parts
in reverse order. (Figure 8).
Figure 8
After cleaning dust cup ,filter and cyclone, assemble in reverse order. Rotate the dust cup cover
assembly into the dust cup.After hearing a "click" and the dot mark is aligned with the lock
position that is assembled in place.
Notice:
1.Do Not miss the filter!
2.Use water or neutral reagents to clean dust cup and wipe with dry cloths. Do not wash the filter until it is
necessary. Make sure the filter and dust cup are completely dry before another use.
5