Maintenance Instructions - bonavi BNV-ST-0002 Manuel D'utilisation

Maintenance Instructions

To ensure a smooth and long-lasting journey with your Bonavi stroller, we ask you to regularly maintain and
care for your stroller. Always keep in mind that your Bonavi is in daily use and therefor natural signs of use and
wear are normal.
To guarantee that your warranty is valid, the stroller must be used in accordance with our user manual and
care instructions. Please have a look at our maintenance tips below and make sure to follow these in regular
intervals:
• Clean the wheels: Periodically remove the wheels (front and rear wheels) and brush off any dirt,
stones or sand from the inner axle of the wheel. Use a brush and water, or detergent such as WD-40,
to remove dirt from the wheels. Do not submerge the wheel's bearings in water. To maintain the
smoothness of the wheels, you can also apply some Vaseline cream to the suspensions.
• Clean the frame: The aluminium parts of the stroller are anodized to protect it from external
influences. Clean the frames with a soft dust cloth and lukewarm water only. Keep in mind that
anodized aluminium parts are vulnerable to acid cleaners or grease, which can cause stains and
discoloration of the aluminium parts.
• Lubricate joints and wheels: To ensure a smooth ride and ease of use, please lubricate the wheels and
joints at regular intervals. Use commercially available Vaseline or automotive lubricant, such as WD-
40, preferably silicone based.
• Clean and maintain fabrics: All fabrics can be hand washed at 30 degrees and leave to dry. Never use
bleach or other chemical detergents. The outer fabrics (e.g. the canopies) can be cleaned with a cloth.
Do not to leave the pram standing in the blazing sun when the sun is shining. The increased sunlight
may cause the fabrics to fade.
• Mattress: The mattress cover can be hand washed at 30 degrees. The foam rubber material of the
mattress can be cleaned with a damp cloth. After cleaning, make sure that all mattress parts are dry
and returned to their original position.
• Push handle: Use a soft sponge and lukewarm water to gently rub off any dirt on the push handle and
front bumper. Wipe clean any soap residue left with a dry cloth.
• Rain cover: Always use the rain cover when it rains, otherwise water stains may appear on the outer
fabrics. Only clean the rain cover with a damp cloth. Make sure that the rain cover is sufficiently dried
after use before it is stowed away again.
• Storage: Store your Bonavi and its accessories in a dry place and leave them unfolded when wet to
prevent mould.
• Moving parts: Regularly check if all parts are still firmly attached.
• Special care during the winter months: Road salt can cause increased corrosion of the frame and
brake. Please clean your pram thoroughly with water and dry it afterwards, especially during the cold
months.
If you need to purchase additional spare parts you can do so directly from our web shop www.bonavi.de or get
in touch with our customer service directly.
48