Seat Recline - bonavi BNV-ST-0002 Manuel D'utilisation

Detach, Fold and Unfold Canopy
1.
Remove the canopy by care-
fully pulling the canopy clamp
from the seat frame. When the
canopy is attached, clamp the
canopy to the seat frame,
making sure the canopy is
tightly and correctly spanned.

Seat Recline

Detach Seat
2.
Fold and unfold the canopy in
four different positions accor-
ding to your needs.
Pull the backrest lever up and down and release it to stay at your
desired positions. There is a total of three positions: Upright, half
reclined, and fully reclined.
Press down the two rectangular buttons on both sides, to lift up
the seat unit.
Warning: The carry cot can only be released from the
chassis fixtures when the release buttons are used.
35
3.
The canopy can be extended
by one more unit unzipping
the extra layer.