bonavi BNV-ST-0002 Manuel D'utilisation page 30

Assembly Instruction / Using the Carry Cot
1.
Open the velcro and pull the frame wires into
the fixtures on both sides. Makes sure both
wires are fully engaged.
3.
Place the mattress into the carry cot.
WARNING: Adding a further mattress
is strictly prohibited.
5.
Use the press buttons to fix the
top cover to the carry cot body.
2.
Place the head guard in the carry cot
and connect it to the velcro
of the carry cot inner lining.
4.
Attach and detach the sun hood to the canopy
frame using the available front zipper. The sun
hood and sunsail can be used at the same time.
6.
Lift the handle until an upright position (90°) is
reached. WARNING: Ensure that the handle is
fully locked before carrying the carry cot.
30