How To Assemble And Operate The Vacuum; How To Change The Vacuum Bag; Edge Cleaning Feature - Tornado CK-14/1 Pro Manuel D'utilisation Et De Pièces

How to Assemble and Operate the Vacuum

How to Attach the Handle to the Vacuum Cleaner
The vacuum cleaner and the handle are packed separately.
1. After first removing the handle screw, insert handle
into the hole on top of the vacuum cleaner. (Fig. 4)
2. Line up the small hole on the handle with the small
hole on the vacuum cleaner and insert the screw.
Make sure the screw is secured tightly.
On / Off Switch
1. To turn the vacuum on, push the switch located
the rear of the unit to the ( I ) position. (Fig. 5)
2. To turn the vacuum off, push the switch located on
the rear of the unit to the ( O ) position.
Always operate the vacuum cleaner with a vacuum bag installed.

How to Change the Vacuum Bag

1. Unplug the vacuum cleaner. Remove the bag compartment cover and
remove the used bag from the bag holder (Fig. 6).
2. Attach the new vacuum bag onto the bag holder (Fig. 7).
3. Pull the bottom corners of the new vacuum bag (Fig. 8).
4. Reinsert the tab on the end of the bag compartment cover into the grove
on the bag compartment housing. Press it into place and fasten the bag
compartment tightly (Fig. 9).
The Edge Cleaning Feature provides improved cleaning of carpets near walls and stationary furniture. For maximum edge
cleaning, use the right side of the vacuum near walls or stationary furniture.
All manuals and user guides at all-guides.com
How to Change the Vacuum Bag

Edge Cleaning Feature

Fig. 6
Fig. 8
Fig. 10
6
Fig. 4
Fig. 5
Fig. 7
Fig. 9