Display Settings - JVC KD-R761 Manuel D'instructions

AUDIO SETTINGS
D.T.EXP ON: Creates realistic sound by compensating the high-frequency
(Digital Track components and restoring the rise-time of the waveform that are lost in
Expander) audio data compression. ; OFF: Cancels.
TEL MUTING * 5
ON: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100). ; OFF: Cancels.
SPK/PRE OUT Selects the appropriate setting to get the desired output.
* 5
Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT]. ( 4)
SPK/PRE OUT
Connection via lineout terminals (
Setting
FRONT
(for KD-R761 / KD-R661)
REAR/REAR Front speakers output
REAR/SUB.W Front speakers output
SUB.W/SUB.W Front speakers output
Connection via speaker leads (
Setting
L (left)
REAR/REAR Rear speakers output
REAR/SUB.W Rear speakers output
SUB.W/SUB.W Subwoofer output
If [SUB.W/SUB.W] is selected:
– [HIGH 120HZ] is selected in [SUB.W LPF] and [THROUGH] is not available.
– [R01] is selected in [FADER] and selectable range is [R06] to [00]
)
17
Lineout terminal
REAR/SW
Rear speakers output
Subwoofer output
Subwoofer output
)
17
Rear speaker lead
R (right)
Rear speakers output
Rear speakers output
(Mute)

DISPLAY SETTINGS

KD-R761
KD-R661 / KD-R469 / KD-R467 / KD-R464 / KD-R462 / KD-R461
1 Press and hold
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
OFF: Selects the day adjustments. ; ON: Selects the night adjustments. ;
DIMMER TIME: Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [ON] time, then press the knob.
Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 or 6:00 PM
[OFF]: 6:00 or 6:00 AM)
AUTO: Changes between the day and night adjustments when you turn off or
on the car headlights. *
For KD-R761 / KD-R567 / KD-R561 / KD-R469, the display and button
colors change according to the settings made on [COLOR].
* 1
The illumination control wire connection is required. ( 17)
KD-R567 / KD-R561
.
.
1
ENGLISH
Default: XX
11