Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AUDIO SETTINGS
EQ SETTING
EQ PRESET
FLAT / HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE: Selects a preset
equalizer.
1 USER1/ USER2: Select a preset name.
EASY EQ
2 Adjust your own sound settings.
SUB.W SP *
*
1
2
:
SUB.W *
*
1
3
:
BASS LVL:
MID LVL:
TRE LVL:
1 USER1/ USER2: Select a preset name.
PRO EQ
2 BASS / MIDDLE / TREBLE: Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
BASS
Frequency: 60/ 80/ 100/ 200 HZ
Level:
Q:
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 KHZ
Level:
Q:
TREBLE
Frequency: 10.0/ 12.5/ 15.0/ 17.5 KHZ (Default: 10.0 KHZ
Level:
Q:
AUDIO
BASS BOOST +01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD
01 / 02: Boosts low or high frequencies to produce a well-balanced sound at
low volume. ; OFF: Cancels.
10
Default: XX
00 to +06
(Default: 03
–08 to +08
–06 to +06
–06 to +06
–06 to +06
( Default: 80 HZ
–06 to +06
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Default: 1.0 KHZ
–06 to +06
Q0.75/ Q1.0/ Q1.25
–06 to +06
Q FIX
SUB.W LEVEL *
1
SPK-OUT *
PRE-OUT *
SUB.W *
3
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF *
1
THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ /
MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than
00
55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
00
SUB.W PHASE *
1
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
00
output to be in line with the speaker output for optimum performance.
00)
(Selectable only if a setting other than [THROUGH] is selected for
[SUB.W LPF].)
FADER
R06 — F06 (00): Adjusts the front and rear speaker output balance.
BALANCE *
4
L06 — R06 (00): Adjusts the left and right speaker output balance.
00
VOL ADJUST
–05 — +05 (00): Presets the volume adjustment level of each source
Q1.0)
(compared to the FM volume level). Before adjustment, select the
source you want to adjust. ("VOL ADJ FIX" appears if FM is selected.)
00
Q1.25)
AMP GAIN
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
00
the speakers.) ; HIGH POWER: The maximum volume level is 50.
Q FIX)
*
1
Displayed only when [SUB.W] is set to [ON].
*
2
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 11)
*
3
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 11)
*
4
This adjustment will not affect the subwoofer output.
2
00 to +06 (+03): Adjusts the output level of the
subwoofer connected via speaker lead. ( 17)
3
–08 to +08 (00): Adjusts the output level of the
subwoofer connected to the lineout terminals (REAR/
SW) through an external amplifier. ( 17)
Publicité
Table des Matières
