Display Settings - JVC KD-R960BTS Manuel D'instructions

AUDIO SETTINGS
SPK/PRE OUT
Connection via lineout terminals (
(For KD-R960BTS / KD-R860BT)
Setting
FRONT
REAR/REAR Front speakers output
REAR/SUB.W Front speakers output
SUB.W/SUB.W Front speakers output
(For KD-AR865BTS)
Setting
FRONT
REAR/REAR Front speakers output Rear speakers output
—
REAR/SUB.W
SUB.W/SUB.W Front speakers output L (left): Subwoofer output
Connection via speaker leads (
Setting
L (left)
REAR/REAR Rear speakers output
REAR/SUB.W Rear speakers output
SUB.W/SUB.W Subwoofer output
If [SUB.W/SUB.W] is selected:
– [HIGH 120HZ] is selected in [SUB.W LPF] and [THROUGH] is not available.
– [R01] is selected in [FADER] and selectable range is [R06] to [00]
22
)
31, 32
Lineout terminal
REAR/SW
Rear speakers output
Subwoofer output
Subwoofer output
Lineout terminal
REAR SW
Subwoofer output
— —
Subwoofer output
R (right): (Mute)
)
31, 32
Rear speaker lead
R (right)
Rear speakers output
Rear speakers output
(Mute)

DISPLAY SETTINGS

KD-R960BTS
1
Press and hold
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
OFF: Selects the day adjustments. ; ON: Selects the night adjustments. ;
DIMMER TIME: Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [ON] time, then press the knob.
Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 or 6:00 PM
[OFF]: 6:00 or 6:00 AM)
AUTO: Changes between the day and night adjustments when you turn off or
on the car headlights. *
For KD-R960BTS, the display and button colors change according to the
settings made on [COLOR].
* 1
The illumination control wire connection is required. ( 31, 32)
KD-AR865BTS / KD-R860BT
.
.
1
Default: XX