Beper 90.371 Manuel D'instructions page 11

Pizza oven Use instructions
1. Temperature Control
2. Timer
3. Heating elements selection
4. Control area window
5. Handle
6. Firestone to bake the pizza
7. Tray for pizza
8. Heating elements
9. Power cord
INSTRUCTIONS FOR USE
FIRST USE
Remove the oven from packaging and place it on a stable and horizontal surface.
Make sure that there aren't packing inside the oven. Check the integrity of the oven and baking
stone.
Make sure that mains voltage is the same as that specified on the technical data and that the system
is compatible with the power of the oven.
Clean the oven with a soft cloth dampened with warm water.
When the oven is disconnected from AC power, place the pan in the correct position so that it fits
inside the oven and place on the baking stone and the grooves in the base of the baking stone with
the grooves in the center of the pan.
It's recommended to slightly rotate the baking stone clockwise and counterclockwise to ensure its
complete stability.
Do not operate the oven without a baking stone.
Make sure that the temperature dial knob is set to MIN, the timer is set to 0 and the function selector
switch to OFF.
Plug the power cord into the power supply.
In order to remove any manufacturing residue and smells of the package, place the function knob to
the maximum temperature and set timer for 15 minutes. Leave the oven for 15 minutes.
We recommend to turn timer more than time to set up and then bring it back up to the time set /
desired.
Oven doesn't work if you do not set a cooking time with timer.
Before cooled oven and then clean the stone with a damp cloth to remove any dust.
OPERATION
Make sure that the temperature knob is positioned on MIN, timer in 0, and function selector switch
to OFF before connecting the power cord to the electrical current.
Place the oven on a resistant to heat and dry surface.
Make sure that pan and baking stone are placed in the correct position.
Connect power cord to the electrical current.
11