Locomotive Settings - Roco CSX Manuel

The Sounddecoder

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous decoder properties to your wishes however.
Certain parameters (referred to as CVs – Configuration Variable – or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the decoder not reacting correctly.
The decoder is preprogrammed with 28/128 speed steps at the factory for a high level of comfort. This means that it can be used together
with all of the modern DCC (Z21® / z21® / z21® start) and Motorola® control devices.
The Sounddecoder has been especially modified for the additional functions and
must not be replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the
programming track
72803.indd 27
27
11.06.2019 11:19:49