FS T5850-24S2C Guide De Démarrage Rapide page 7

Installing the Power Supply Module
1. Hold the handle of the Power Supply Unit with one hand and press on the top of the Network
Packet Broker with another hand.
2. Pull out the power module by smoothly sliding along the power slot until the plug of power
module is completely separated from the socket inside chassis.
Grounding the Network Packet Broker
+
-
NU LL
-4 8V - -6 0V
,6A
1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the
Network Packet Broker is mounted.
2. Secure the grounding lug to the grounding point on the Network Packet Broker back panel with
the washers and screws.
6