Optional Accessories - Aqua Marina BETTA Serie Guide Utilisateur

I
Blade
KAYAK PADDLE ASSEMBLY
1. Press and align the push-bottom on the paddle blade with the short shaft hole,
ensure the push-bottom is securely snapped onto the short shaft hole.
2. Join the 2 shafts together by pressing and aligning the push-bottom securely
snapped onto the hole.
3. To disassemble, reverse the assembly steps.
Note: it is not necessary to detach the paddle blades from the shafts.
NOTE: Always drain the water left in the paddle shaft after each use.
J
PADDLE ASSEMBLY
Shaft

OPTIONAL ACCESSORIES

SUPER 12V ELECTRIC PUMP FOR INFLATABLE WATER SPORT ITEMS
KAYAK PADDLE (* Optional for STEAM )
Shaft
13
Blade