Aqua Marina BETTA Serie Guide Utilisateur page 10

KAYAK DEFLATION
1. Clear any water or debris out of the valve areas.
2. HIGH PRESSURE VALVE
Slowly press down on the valve stem to let air out of the kayak. There will be an initial burst
of air, but will slow down very quickly. Once the air flow has slowed down, press the valve
stem all the way down and turn it clockwise to lock it into the "OPEN" position.
FLOOR AIR VALVE
Open external cap and pull firmly to extend out. Start to deflate by using the transparent
hose (come with the repair kit bag), or by simply squeezing the bottom of the valve.
F
NOTE: For STEAM, remember to remove the DWF air deck floor before folding.
KAYAK FOLDING STEPS
1. Remove all the accessories from the kayak: seats, paddles, kayak fins, etc.
NOTE: For STEAM, remember to remove the DWF air deck floor before folding.
2. Make the first fold from the bow. Continue folding towards the valves tightly, forcing out
any remaining air as you go.
NOTE: Please avoid bending the fin box.
3. Fold the kayak all the way to the end to push all the air out.
4. The kayak carry bag is designed to allow you to get your kayak into the bag as easily as
possible with minimal folds.
10