CLAS PE 2001 Mode D'emploi page 38

PE 2001
2 COLUMNS ASYMETRIC POST LIFT 4T
5 INSTALLING THE ARMS
Install the arms in the slots located on the carts
Install the corresponding arm extensions and secure them with M8 × 12 bolts, to avoid oscillations.
Install the adapter to the holes on the extension arms (you can choose the height adapter
according to the frame of your lift) See Picture 8.
6 INSTALLING THE ELECTROMAGNETIC UNLOCKING DEVICES
Install the electromagnetic safety lock on the column.
Adjust the nut to the pivot to let the safety device hooks the cart (the distance between the
iternal side of the column and the cart is about 30 ~ 34mm) then proceed with the fastening of
the nut (see Picture 9).
38
Block
Electromagnet
Picture 8
Picture 9
Unblock
Safety Lock