Tuning In Stations; Storing Stations - Eton ZoneGuard+ Manuel Du Propriétaire

LISTEN TO AM/FM
Select Band
Press the <AM/FM> button to listen to AM/FM band,
repeatedly press it to shift between AM and FM.

Tuning in Stations

1. Manual Tuning: Press the <
2. Auto Scan Tuning: Press and hold the <

Storing Stations

When listening to AM/FM band, tune into your desired
station, press the <MENU> button, the LCD will display
<STORE-->. Press either of the 6 <Memory Location>
buttons, located on the front of the unit, above the
speakers. You can directly press the corresponding memory
location to retrieve the saved station.
To retrieve better reception when listening to the FM
station, adjust the length of the antenna and place near
a window. When listening to the AM station, rotate the
unit to retrieve a signal.
ZONEGUARD+ OWNER'S MANUAL
repeatedly to tune into your desired
station.
button until frequency starts
scanning to auto tune into the next
available station. If the signal is
not strong enough, you can tune
manually to get a better reception.
> or < > button
> or < >
15