Marshalltown Bullet 920 I-20-PC Mode D'emploi page 6

Step 3 – Attach the Rails (C) to the Power
Assembly (B) using Machine Screws (H)
threaded with Star Washers (N)
Step 5 – Use Machine Screws (L) to secure the
Table Assembly (A) to the base near the blade
Step 7 – Insert the Handle Extension (G) into
the Handle Assembly (F) by pushing down the
button on the Handle Extension and sliding it in,
making sure the button and holes on the Handle
Assembly line up
6 of 18
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
ASSEMBLY
Step 4 – Use Machine Screws (K) to secure
the Table Assembly (A) to the base at the holes
closest to the handle
Step 6 – Attach the Handle Assembly (F) to the
Power Assembly (B) using the bolt in the Handle
Assembly and the Allen Wrench (J)
Step 8 –Push the Fence (E) into the Table
Assembly (A)
WS2645