General Operation - gopart CR110GP Mode D'emploi

GENERAL OPERATION

Power On/Off Button
On the panel: Press the button to turn the unit on when the vehicle ignition switch is on. Press
and hold the button to turn the unit off.
On the remote control: Press the button to turn on/off the unit.
UK
mode Button (SRC)
Press the SRC button to change between Radio, USB (when USB is connected), Card(when SD/MMC
card is in) or AUX play.
Adjust Volume level
On the panel: Rotate the VOL control to adjust volume level. Rotate it clockwise to increase and anti-
clockwise to decrease the volume.
On the remote control: Press ▲/▼ button to adjust volume level.
Audio mute
On the panel: When on, press the button to mute the volume.
"MUTE" will appear on the display panel and the volume will be muted. Press the MUTE button again, or
rotate or press the VOL control to return the volume level to the setting in use before the Mute function
was activated.
On the remote control: Press MUTE button to mute the volume.
Audio Controls
On the panel: To adjust the bass, treble, balance and fader, press the VOL control, then press repeatedly
until the appropriate audio control appears on the display panel.
Within five seconds, rotate the VOL control to adjust the audio settings for the selected function.
On the remote control: Press SEL button to enter audio setting mode, then press SEL repeatedly until
the appropriate audio control appears on the display panel. Within five seconds, use VOL buttons to
adjust the audio settings for the selected function.
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to the AUX interface on the front panel.
2. Press the SRC button to select Aux-In mode.
Press SRC again to cancel Aux-In mode and go to the next mode.
Viewing Clock Time
Press DISP (once for Radio mode or twice for other modes), display shows the clock time for 5 seconds.
Setting The Clock Time
Press DISP, time displays. Press again for more than 2 seconds, time display blinks.
Rotate the knob to set clock, press DISP again to exit the clock setting.
6
CR110GP
1820111_CR110GP_manual UK_DE_FR 1.indd 6 1/18/11 9:05 AM