Panel Controls - gopart CR110GP Mode D'emploi

PANEL CONTROLS

1. - Press to turn on the unit.
- When on, press to mute the volume.
- When on, press for more than 2 seconds to turn off the unit.
2. - Pressing SOURCE button will toggle the audio source: TUNER -> USB -> CARD-> Aux-in
3. - In tuner mode, press once or more to select band. Press for more than 2 seconds to auto search
and store stations in available memory.
- In USB/CARD mode, press to enter tuner mode.
4. - In TUNER mode Press DISP button once or more to select display content with the following se
quence: Freq->PTY->Time
- In USB/CARD mode Press DISP button once or more to select display content with the following
sequence: Time -> Folder -> File -> Title -> Artist-> Album
- Press for more than 2 seconds to enter system MENU (see "SYSTEM MENU")
5. - Program type
6. - Alternative frequency
7. - Traffic announcement identification
8. - Remote sensor
9. - Radio tune
- Skip to next or previous track
10. - Reset hole (Press SRC button for more than 2 seconds and then press RESET button to reset the
unit.)
11. - Rotate the knob to adjust the volume level.
- Push to enter audio setup menu, then press briefly once or more to select BASS/TREBLE/BALANCE/
FADER, rotate the knob to adjust level.
- Push for more than 2 seconds to enter EQ mode. Then rotate the knob to change EQ preset: EQ OFF,
FLAT, ROCK, POP, CLASSIC.
12. - Button 1: Play/pause Press for more than 2 seconds if you want to start playback from the beginning
of the first track of your USB or SD/MMC card.
- Button 2: Intro play (10 sec.)
- Button 3: Track repeat play
- Button 4: Track random play
- Button 5: Folder down. Skip 10 tracks back files (long press)
- Button 6: Folder up. Skip 10 tracks forwards (long press)
* 1~6 Radio preset
Press to tune in a preset station. Hold for more than 2 seconds to store station.
13. - Aux-in jack
14. - USB connector
15. - SD/MMC card slot
CR110GP
1820111_CR110GP_manual UK_DE_FR 1.indd 5
UK
5
1/18/11 9:05 AM