gopart CR110GP Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRECAUTIONS - CAUTION
PRECAUTIONS
• Use only in a 12-volt DC negative-ground electrical system. Disconnect the vehicle's negative battery
terminal while mounting and connecting the unit.
• When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a
UK
higher amperage rating may cause serious damage to the unit.
• Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions,
or create safety hazards such as electrical shock or laser beam exposure.
• Please power off this unit at once and send it back to the after-sales service center or the dealer /
distributor you purchased from if one of the following symptoms is found:
(1) Water or other obstacle enters the unit;
(2) Smoking;
(3) Peculiar smell.
• If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car
becomes normal before operating the unit.
CAUTION
• DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for
help.
• Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.
• Stop the car before performing any complicated operation.
To provide a clear demonstration and for easy understanding of the operation of this unit, graphic
illustration was used. However, the illustration is not necessarily of the actual unit.
4
1820111_CR110GP_manual UK_DE_FR 1.indd 4
CR110GP
1/18/11 9:05 AM

Publicité

Table des Matières
loading

Produits Connexes pour gopart CR110GP

Table des Matières