FRX5 OWNER'S MANUAL
Set S.A.M.E. location directly entering COUNTY/
PROVINCE code
1. The memory slot number, 01 – 25 will display on the
left side of the display.
2. Rotate the tuning dial up or down to select the
desired channel to set.
3. Press WB to enter
4. Use TUNING dial to select first digit for your location.
5. Press WB to enter.
6. Use TUNING dial to select second digit for your
location.
7. Repeat until all 6 digits are correct.
8. Press MENU to enter.
9. ALL locations OPERATION:
10. Press MENU.
11. Rotate TUNING dial up three steps.
12. COUNTY – MUL, COUNTY –SIN or COUNTY –ALL will
be displayed.
13. Press WB.
14. Rotate TUNING knob until ALL flashes on the screen.
15. Press MENU to select.
16. COUNTY-ALL will be displayed .
17. If no buttons are pressed for 20 seconds, the unit
will go back to normal position.
Enable or Disable S.A.M.E. ALERT
1. Press MENU
2. Rotate TUNING dial five steps
3. ALERT ON or ALERT OFF will be displayed
4. Press WB button
5. The ALERT icon will flash at the top of the screen
6. Rotate the TUNING dial to select either ALERT ON or
ALERT OFF
7. Press MENU to enter and exit
NOTE: ALERT OFF - When a alert is issued, the text alert will scroll across the
screen without audio.
8