emerio WC-127562 Mode D'emploi page 8

The appliance needs to be upgraded before loading of your wines, in a place where the soil can support the load.
Ambient temperature
The appliance should be placed in a room with temperature between 16-38˚C. If the ambient temperature is
above or below the climatic class, the performance of the appliance will be impacted. Cold or warm
temperature can cause fluctuating fridge temperatures, the appliance may not reach the set temperature or
may stop working.
FIRST USE
IMPORTANT: Wait for 8 hours before starting your appliance.
Meanwhile we recommend that leave your appliance upright, clean it and leave it open to eliminate residual
odors.
Recommendations:

Place the appliance in a cool place away from sunlight and heat sources.

Certain parameters such as room temperature, door opening time or the number of bottles stored inside
could affect the internal temperature of your appliance. We recommend that you check the internal
temperature regularly and adjust it if necessary.

Do not cover the vents.
Operating noise:
To reach the desired temperature, this appliance, like all wine fridges with compressor cooling systems, can
produce certain noises, which are normal operating noises.

Gurgling noise: caused by the refrigerant gas circulating in the refrigeration area of the unit.

Cracking noise: resulting from the contraction and expansion of the gas to produce the cold.
The perception of noise by the individual is directly related to the environment in which the appliance is located.
Noise in normal operation is not a cause of the warranty's application.
TEMPERATURE CONTROL
1. Unlock button
2. Light button/ Fahrenheit / Celsius button
3. Temperature increase button
4. Temperature decrease button
Unlock button
Long press the unlock button for 2 seconds to unlock the two temperature adjustment buttons.
Temperature increase / decrease button will be locked automatically if no operation of all buttons for 20
seconds.
Light button / Fahrenheit / Celsius button
Short press the button to turn on/off the light. The light will turn off automatically if no operation of all
buttons for 10 minutes.
Long press the button to switch between Fahrenheit and Celsius.
Temperature adjustment
Press the temperature increase button / decrease button to adjust the temperature. The set temperature will
flash several times in the display, then the display will show the current temperature.
Minimum value: 5°C / 41°F
Maximum value: 18°C / 64°F
- 7 -