Attach A Monitor - StarTech ARMSTS Guide De L'utilisateur

Attach a monitor

Warning! To maintain stability and safe use when you mount a monitor arm on
ARMSTS, you must secure the rear of the base of the sit-to-stand workstation to the
desk.
If you're using a StarTech.com monitor arm, use the following to secure ARMSTS to the
desk:
• The C-Clamp provided with the monitor arm that you're mounting.
If you're using a third-party monitor arm, use any of the following to secure the
ARMSTS to the desk:
• Screws (not included).
• A third-party clamp (not included).
Caution! If you use a clamp to secure the ARMSTS to the desk, make sure that the
weight of the monitor arm is distributed towards the back of the ARMSTS when you
remove the clamp.
Warning! If you add a monitor arm to the ARMSTS, make sure that you don't extend
the monitors beyond the edge of the top plate. If you exceed the product weight
limit or extend the monitors passed the desk surface, you will create a tipping hazard.
Make sure that you install the monitor arm when the ARMSTS is lowered, distribute the
weight evenly, and don't extend the monitors beyond the edge of the adjustable desk
surface.
Instruction manual
Note: You need to position the
clamp within the highlighted area
on either side of the base.
Only one clamp is required.
14