Master Reset - Clarity AlertMaster AL10 Mode D'emploi

Operations
PHONE
CLOCK
ALARM
B. Master Reset
If you have several AlertMaster system components (such as the AL10,
the AL11 or the AL12), you can save time by using the AL10 to reset all
of them at once (master reset). To do this, press the RESET / PAGE
button.
C. Notification Priority
If the AlertMaster system receives two notification signals at the same
time, it will display the highest priority signal. For example, if it receives a
Motion Sensor signal right after it receives a Phone signal, the indicator
will change from PHONE to SENSOR. The priority for each notification
signal is shown as follows:
15
DOOR
SOUND
MOTION
AlertMaster
Operations

1. Master Reset

2. Motion Sensor
3. Audio Alarm
4. Baby Sound
5. Room Sound
6. Phone
7. Door
8. Paging
9. Alarm Clock
10. Random (Security) Timer
D. Security Timer
With this feature, the lamp connected to your AlertMaster system will
go on automatically every evening and turn off later in the evening. You
can use this to make it look like someone is home. The light will turn on
and off at slightly different times each evening so it is not so obvious
that a timer is being used.
To activate this feature:
1. Press the TIMER ON / OFF button once. The lamp will
automatically go on every evening at about 5 PM and turn
off at about 11 PM. To confirm this setting, the clock
will blink twice every five seconds.
a. If you want the light to turn on at about 6 PM, press
SET TIMER once for two seconds or more. To confirm
this setting, the clock will blink three times every five
seconds.
b. If you want the light to turn on at about 7 PM, press
SET TIMER twice for two seconds or more. To confirm
this setting, the clock will blink four times
every five seconds.
E
N
G
L
I
S
H
16