Clarity AlertMaster AL10 Mode D'emploi page 8

Operations
4. SOUND
a. ALL
Slide the MIC switch to the ALL position. The sound indicator
light and sidebar lights illuminate when continuous sound is
detected for 12 seconds or longer in the room by the built-in
microphone. After another 10 second delay, the lamp will flash
on for one second, off for one second, on again for one second
and repeat until two minutes have passed; the bed shaker will also
vibrate while the lamp flashes.
b. MAIN
The light indicates the presence of sound, but it will not trigger
the lamp to begin flashing or any other indicator.
c. OFF
The sound indicator light and the monitoring function are disabled.
NOTE: The sound indicator light illumination function is also activated
when a signal is received from the optional Baby Sound Monitor (AMBX).
The position of the MIC switch is irrelevant – AMBX activates the sound
indicator light regardless of the position of the MIC switch.
PHONE
CLOCK
ALARM
13
DOOR
SOUND
MOTION
AlertMaster
Operations
5. ALARM
You must purchase the optional Audio Alarm Transmitter (Model AMAX)
from Clarity to use this function. When a signal is received from the
Audio Alarm Transmitter, the indicator light illuminates, and the lamp will
turn on for five seconds, off for two seconds, on again for two seconds
and repeat until two minutes have passed; the bed shaker will also
vibrate while the lamp flashes.
PHONE
CLOCK
ALARM
6. MOTION SENSOR LIGHT
You must purchase the optional Motion Sensor (Model AMSX) from
Clarity to use this function. When a signal is received from the Motion
Sensor, the indicator light illuminates, and the lamp will turn on for one
second, off for one second and repeat until two minutes have passed; the
bed shaker will also vibrate while the lamp flashes.
DOOR
SOUND
MOTION
AlertMaster
E
N
G
L
I
S
H
14