PRODUCT OPERATION
6. Bucket Full-
When the bucket is full of water: the unit will automatically shut off, make a beeping
noise, and the "Bucket Full" Indicator will light up. The dehumidifier will not function until the water
bucket is emptied and replaced back inside the unit. The bucket should be cleaned every few weeks to
prevent the growth of mold, mildew, and bacteria. Use a mild detergent to clean the bucket. Once
clean, completely dry the bucket and place it back inside the dehumidifier.
NOTE:
Hold the bucket with both hands when emptying.
•
When the bucket is full or removed from the machine, the compressor will turn off, but the fan
•
will continue to run for a few minutes before shutting off.
•
Do not place a full bucket on the floor, because the bottom is uneven and may spill.
7. Pre-Set Modes-
to-room and select the corresponding mode for the location in which the dehumidifier is operating for
optimum performance. Press the "MODE" button to choose from Continuous, Basement, or Bedroom.
8
1
Preset humidity level settings allow the user to easily move the dehumidifier room-
2
3
4
5