Product Operation; Control Panel - Royal Sovereign RDH-230 Manuel Du Propriétaire

PRODUCT OPERATION

Control Panel

NOTE: When first operating the dehumidifier, run it in Continuous Mode for 24 hours.
1. Power On and Off -
button once more to turn the unit off.
2. Humidity Selection -
press of the button will change the desired room humidity by 5%. The room humidity is selectable from
35% - 80% or continuous. The unit will cycle on and off to maintain the humidity level chosen on the digital
display. If you want the dehumidifier to operate continuously regardless of the room humidity, press the
"MODE" button until you see "CO" on the digital display. This will enable continuous operation and the
"Continuous" Indicator will light up on the control panel.
3. Fan Speed Control -
The fan speed can be visually distinguished by the fan speed indicators on the control panel.
6
Press the "POWER" button once to manually turn the unit on. Press the "POWER"
˅ ˄
Press the or buttons to choose the desired relative humidity in the room. Each
Press the "FAN" button to cycle through the different fan speeds: High and Low.