Table des Matières
Publicité
EF-Series Powered
Full Range Loudspeakers
It was not easy creating a new élite
series following the success of the ground
breaking older élite line. Our designers
stepped up to the task and delivered
something not only new, but even more
ground breaking! The designers chose the
iconic élite EF500P as the benchmark for
sound quality, then they implanted 1200
watts of bi-amped power using advanced
digital signal processing. The EF12P,
EF15P and the EF215P models use a 1200
watt amp and the EF10P uses a 500 watt
lower power version. A Bluetooth™ control
was added for increased versatility. Finally,
they designed cabinets that can handle
and deliver the power and sound quality
expected by our faithful users. With this
type of power and versatility the EF-Series
powered cabinets are already setting a new
standard for active loudspeakers.
Note: The lower power EF10P uses the same technology as the EF12P, EF15P or EF215P but
due to the drivers and physical package using higher power was not feasible.
Features
• Ultra-clear audio reproduction throughout the whole bandwidth
• High efficiency, high tech, 1200 and 500 watt bi-amped power modules
• Superior DSP processing with component protection
• True 3-inch Titanium diaphragm horn driver (1-inch on EF10P)
• Low distortion and high power-handling 10, 12 and 15-inch woofers
• Master Level control (cabinet level adjustment)
• Multi-input source mixer with Combi-Jacks (XLR + 1/4-inch TRS hybrid)
• Line input with Combi-Jack (XLR + 1/4-inch TRS hybrid) and 1/8-inch TRS inputs*
• Direct microphone input with level control and phantom power
• Combi Jack (XLR + 1/4-inch TRS hybrid) input and XLR output for easy Linking
• Four EQ modes including a Bluetooth™ adjustable user mode
• Recessed Mixer panel
• Integrated flying hardware (1/4-20 inch threaded holes)
• Ultra strong plywood cabinet and a tough, full-length metal grille
* EF12P REV1 and EF15P REV1 use RCA connectors instead of an 1/8-inch connector
for Channel 1
1
Publicité
Table des Matières
