Warranty; Declaration Of Conformity - Pattfield Ergo Tools PA-550ST Mode D'emploi

VII - Warranty
Dear customer, our products are going under
strictly quality controls.
In case of malfunctions, which are pointing
out material or manufacturing faults, please
contact your Hornbach store.
To enforce warranty claims obtains :
1. These conditions are ruling additional
warranty performances and are free of
charge.
The warranty rules given by law will remain
untouched.
GB
2. The warranty performance is limited
on material or manufacturing faults and
the elimination of those or alternatively
exchange of the product. As our products
are not constructed for professional use, we
see the warranty contract as not valid, if the
product is used under those circumstances.
Excluded are ; warranty claims for
transportation damages, damages coming
from non-observance of the manual ( like
connection to wrong voltage or wrong
electricity ),unprofessional installation,
incorrect use( like overstressing the
product or usage of not approved tools
or accessories ), non-observance of the
of foreign objects ( like sand, stones or dust
), wrong force or man inducted events ( like
damages caused by falling down ), plus
normal accepted attrition ( like battery packs,
blades and so on ). The warranty claim
expires if intrusions were already done.
3. The warranty period is three years and
is starting with the date of purchase of the
product. warranty claims must be raised
within two weeks after realising the defect.
Warranty claims coming later are excluded.
The warranty period is neither extended
99
after repair or exchange nor a new warranty
period is started fort he product or possible
spare parts.
4. To enforce warranty claims contact your
Hornbach store and show your bill as an
original or another dated buying proof.
Therefore keep your receipt accurately.
Explain the reason of your claim as good as
possible. Is the defect part of our warranty
performance, you will get a repaired or new
product at once.
VIII - Declaration of Conformity
We declare, that the product described in
Technical Data:
550W Jig Saw PA-550ST
manufactured for:
Hornbach Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Direcitve 2006/42/EC EMC Directive
2004/108/EC
and in accordance to the following applicable
harmonized standards:
EN 60745-1:2009 +A11
EN 60745-2-11:2010
EN 55014-1:2006+A1+A2
EN 55014-2:1997+A1+A2
EN 61000-3-2:2006+A1+A2
EN 61000-3-3:2008
Andreas Back Head of Quality Management,
environment & CSR Person authorised to compile
the technical file
Bornheim, 24.11.2014
Hornbach Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
GB
100