If the refrigeration appliance is installed next to another refrigerator or
freezer a clearance of 5 cm at the sides is required, in order to prevent the
formation of condensation on the outside of the appliance.
Your Refrigerator Needs Air
For correct operation this
appliance must be located in
a dry atmosphere, away from
heat sources, e.g. cookers,
radiators, boilers and direct
sunlight.
You should also ensure that
air
can
around the back and the top
of the cabinet. There should
be 100mm (4") between the
top of the cabinet and any
overhanging kitchen furniture.
Alternatively allow 50mm (2") between the top of the cabinet and any
overhanging kitchen furniture and a gap of 25mm (1") on either side of the
appliance.
If your refrigerator is installed
under a continuous worktop,
an air outlet opening of at
least 200 cm
grille (A/B) matching the
worktop design should be
installed at the rear of the
worktop. The cut surfaces of
the worktop (C) should be
varnished to avoid swelling due
to penetration of moisture. The
appliance wall distance must
beat least 30 mm and should
be
checked
ventilation grille is inserted.
circulate
freely
2
and a ventilation
before
the
27