Teamtex ENO 360 Mode D'emploi page 27

Installation option: 3-point seatbelt
•
Place the child car seat onto the car seat
1
and move it into the forward-facing position.
•
Guide the car's 3-point seatbelt through the
first opening in the back rest of the child seat
and guide it back out again through the sec-
ond opening. Close the belt buckle on the
car's 3-point seatbelt.
•
Ensure that the diagonal belt is positioned
above the upper part of the back rest on the
child car seat.
•
Ensure that the pelvic restraint goes through
the hole between the back rest and the seat.
•
Make sure that the safety belt is not twisted.
•
Pull the car's safety belt as tight as possible
and check whether the seat is positioned
securely.
•
Unlock the belt buckle of the child car seat
2
and place the belt on the outer side of the
seat.
•
Put the child in the child car seat.
•
Adjust the height of the head support so that
the shoulder belt remains free.
•
Close the belt buckle again until a "click" can
be heard.
•
Pull on the front adjustment belt in order to
pull the belt tight. Please ensure that the
straps are not twisted.
•
Adjust the shoulder pads so that they fit
comfortably on the child's chest and shoul-
ders.
•
Please remove the baby insert under the
3
comfort insert in the forward-facing position.
•
The comfort insert is for children who weigh
9-13 kg.
•
The comfort insert may be removed de-
pending on the size of the child if the child
weighs between 13 and 18 kg.
27
- 27 -
EN