Teamtex ENO 360 Mode D'emploi page 25

•
The baby insert and the comfort insert are
4
suitable for infants under 6 kg.
•
The baby insert is not required for a body
weight of 6 - 13 kg.
•
Adjust the height of the head support to the
size of the child.
•
Place the child car seat onto the car seat, set
5
it to the maximum angle and turn it towards
the car door.
•
Unlock the belt buckle of the child car seat
and place the belt on the outer side of the
seat.
•
Put the child in the child car seat.
•
Adjust the height of the head support so that
the shoulder belt remains free.
•
Close the belt buckle again until a "click" can
be heard.
•
Pull on the front adjustment belt in order to
pull the belt tight. Please ensure that the
straps are not twisted.
•
Turn the seat into the rear-facing position.
Check whether the child car seat is locked
in this position.
Group 1 (forward-facing)
(For children who weigh 9-18 kg)
Installation option: Isofix + Top-Tether
•
Place the child car seat onto the car seat
1
and move it into the forward-facing position.
•
Press the two lateral Isofix connector
buttons in order to extend the Isofix connec-
tors to their full length.
•
Insert the Isofix connectors into the insertion
aids and press until you hear them lock.
•
The display on both sides only turns green
when the connections have been estab-
lished. Press the child car seat against the
back rest until it is standing securely.
25
- 25 -
EN